Bosch KTS 250: Για ευέλικτες και γρήγορες διαγνώσεις ECU

H νέα συσκευή διάγνωσης της Bosch KTS 250, είναι ιδανική ως πρόσθετη συσκευή σε συνεργεία αυτοκινήτων, για χρήση στην υποδοχή του οχήµατος ή σε περιπτώσεις ακινητοποίησης οχήµατος.
Εξοπλισµένο µε το λογισµικό συνεργείου Bosch ESI[tronic], το KTS 250 επιτρέπει οικονοµικές διαγνώσεις ECU σε σχεδόν οποιοδήποτε τύπο επιβατικού αυτοκινήτου στην αγορά.
To διαγνωστικό είναι φιλικό προς τον χρήστη, ενώ το λογισµικό του καλύπτει µέχρι στιγµής περίπου 150 κατασκευαστές αυτοκινήτων. Χάρη στον ισχυρό επεξεργαστή, τα προγράµµατα φορτώνονται γρήγορα και εξασφαλίζονται ταχείες διαγνώσεις.
Αυτόµατη αναγνώριση οχήµατος µέσω αριθµού πλαισίου
Η αναγνώριση του οχήµατος πραγµατοποιείται αυτόµατα µέσω του αριθµού πλαισίου από την πιο ενηµερωµένη βάση της αγοράς µέχρι στιγµής.
Η συµπαγής οθόνη αφής επτά ιντσών παρέχει στον χρήστη µια εξαιρετικά γρήγορη επισκόπηση όλων των µονάδων ελέγχου που είναι εγκατεστηµένες στο όχηµα.
Χάρη στην ανάλυση των 1024 x 600 pixel, τα κείµενα και τα γραφικά εµφανίζονται καθαρά και είναι εύκολα αναγνωρίσιµα.
Μόλις η συσκευή KTS 250 συνδεθεί µε το όχηµα µέσω του καλωδίου OBD, επιτρέπει την ανάγνωση των πραγµατικών τιµών των µονάδων ελέγχου και της µνήµης σφαλµάτων. Ειδικοί προσαρµογείς OBD είναι διαθέσιµοι για παλαιότερα οχήµατα.
Μέσω της λειτουργίας εκτύπωσης, τα αποτελέσµατα µπορούν να εκτυπωθούν σε έναν εκτυπωτή συνδεδεµένο στο δίκτυο συνεργείου.
H συσκευή διάγνωσης είναι εξοπλισµένη µε ενσωµατωµένη µπαταρία ιόντων λιθίου, η οποία φορτίζεται κατά τη διάρκεια της διάγνωσης από το αυτοκίνητο µέσω του καλωδίου OBD.
Διασύνδεση Ethernet
Με τη νέα συσκευή διάγνωσης, τα συνεργεία είναι εξοπλισµένα για το µέλλον, αφού το KTS 250 υποστηρίζει το DoIP (Diagnostics over Internet Protocol), τη νέα διαγνωστική διεπαφή που βασίζεται στο Εthernet και που επιτρέπει πολύ υψηλότερες ταχύτητες µεταφοράς δεδοµένων.
Επιπλέον, το KTS 250 επιτρέπει την παράλληλη επικοινωνία µε διαφορετικές µονάδες ελέγχου σε διαφορετικά κανάλια επικοινωνίας.
Η ενηµέρωση των δεδοµένων γίνεται online µέσω σύνδεσης WLAN και χωρίς επιπλέον µονάδα δίσκου DVD ή σύνδεση σε υπολογιστή συνεργείου. Με την ίδια ευκολία, η άδεια χρήσης λογισµικού πραγµατοποιείται επίσης στο διαδίκτυο.
Αφού εισαχθεί το όνοµα χρήστη και ο κωδικός πρόσβασης, η νέα συσκευή διάγνωσης KTS 250 µπορεί να χρησιµοποιηθεί αµέσως.
New compact Bosch KTS 250 tester for mobile and quick ECU diagnoses
Bosch launches a new diagnostic tester onto the market which has specifically been developed for mobile and straightforward workshop use.
The compact and robust Bosch KTS 250 is perfectly suitable for small automotive workshops, for use at workshops’ vehicle reception or as an additional device for larger workshops. The tester stands out for its high user friendliness.
A new, intuitive and Android-based user interface supports its operator. Equipped with Bosch Esitronic workshop software, KTS 250 allows economical ECU diagnoses on almost any type of passenger car on the market. So far, the software covers some 150 car makes and is thus equally comprehensive and complete as Esitronic 2.0 installed on larger Bosch diagnostic testers. Thanks to its powerful processor programs are loaded quickly and rapid diagnoses are ensured.
Automatic vehicle identification via VIN code
Even the vehicle identification is performed automatically via VIN code and the most comprehensive VIN database on the market so far. In almost no time, the compact seven-inch touch screen provides the user with an overview of all control units installed at the vehicle.
Thanks to a resolution of 1024 x 600 pixels, texts and graphics are displayed clearly and easily readable. Once the KTS 250 tester has been connected to the vehicle by means of the OBD cable included in the scope of delivery, it allows reading out the actual values of the control units and the fault memory.
Vehicle-specific OBD adapters are available for older vehicles. By means of the printing function, the results can be printed out at a printer connected to the workshop network. For its power supply, the tester is equipped with an integrated lithium-ion battery. During diagnoses, the tester is supplied by the vehicle tested via the OBD connector.
DoIP ethernet interface already integrated
With the new tester, workshops are already very well equipped for the future. KTS 250 supports DoIP (Diagnostics over Internet Protocol) – the new, ethernet-based diagnostic interface.
It allows much higher data transfer rates. Since the modern interface has already been used for control unit flashing for quite a while, an increasing number of vehicle manufacturers relies on Ethernet for diagnostic purposes as well. In addition, KTS 250 also allows parallel communication with different control units on different communication channels.
Data updating is made online via WLAN connection and without any additional DVD drive or connection to a workshop computer. With the same easiness, software licensing is also carried out online. Once the user name and the password have been entered, the new KTS 250 diagnostic tester can be used right away.